Other Makes


Throughout the years, many motorcycles makes have come and gone. Some companies were absorbed by others, and others just faded away. Some of the lesser-known brands have parts listed below. If you don't see what you need, don't hesitate to give us a call and we'll help.

For general parts, please see the product index on the left.

Viewing 61to 70(261Total)
Sort by:


Cables, Custom

Need a hard-to-find cable? We can can usually make it from parts on-hand, but occasionally, we'll need to harvest hardware from a used cable to complete the process (the hardware can be replated prior to re-use). We can work from accurate dimensions, or from your sample. This is a one-off process, so a phone call might be necessary to get it all right.

Cables, Custom -

Need a hard-to-find cable? We can can usually make it from parts on-hand, but occasionally, we'll need to harvest hardware from a used cable to complete the process (the hardware can be replated prior to re-use). We can work from accurate dimensions, or from your sample. This is a one-off process, so a phone call might be necessary to get it all right.

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Cables, Custom
Price
Description

Need a hard-to-find cable? We can can usually make it from parts on-hand, but occasionally, we'll need to harvest hardware from a used cable to complete the process (the hardware can be replated prior to re-use). We can work from accurate dimensions, or from your sample. This is a one-off process, so a phone call might be necessary to get it all right.

Motorcycle Model Any
Motorcycle Manufacturer Any
Cables, Rear Brake, Pull Type
Bare-wire cable with clevis fitting at one end, 6mm threaded stud at the other. Measurement to end of threads. Other lengths available upon request.
Cables, Rear Brake, Pull Type - $20.00
Bare-wire cable with clevis fitting at one end, 6mm threaded stud at the other. Measurement to end of threads. Other lengths available upon request.
Motorcycle Model Any, Metisse, MkIII, MkIV, Pursang, TY250
Motorcycle Manufacturer Any, Bultaco, Rickman, Triumph, Yamaha
   
Cables, Rear Brake, Pull Type
Price $20.00
Description Bare-wire cable with clevis fitting at one end, 6mm threaded stud at the other. Measurement to end of threads. Other lengths available upon request.
Motorcycle Model Any, Metisse, MkIII, MkIV, Pursang, TY250
Motorcycle Manufacturer Any, Bultaco, Rickman, Triumph, Yamaha
Cables, Throttle, Elbow at Carb End

This Motion Pro cable helps with limited-clearance situations. Elbow is approximately 45 degrees, the housing length from adjuster-to-adjuster is approximately 38-1/2 inches.

Cables, Throttle, Elbow at Carb End - $24.00

This Motion Pro cable helps with limited-clearance situations. Elbow is approximately 45 degrees, the housing length from adjuster-to-adjuster is approximately 38-1/2 inches.

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Cables, Throttle, Elbow at Carb End
Price $24.00
Description

This Motion Pro cable helps with limited-clearance situations. Elbow is approximately 45 degrees, the housing length from adjuster-to-adjuster is approximately 38-1/2 inches.

Motorcycle Model Any
Motorcycle Manufacturer Any
Cables, Throttle, Nylon-Lined

Our works-quality throttle cables are made in-house from only the finest materials to ensure your satisfaction for fit-and-function. We can produce throttle cables for an amazing arrary of applications; only our most popular are listed here. Please telephone with any other specific needs.

Cables, Throttle, Nylon-Lined - $23.00

Our works-quality throttle cables are made in-house from only the finest materials to ensure your satisfaction for fit-and-function. We can produce throttle cables for an amazing arrary of applications; only our most popular are listed here. Please telephone with any other specific needs.

Motorcycle Model Any
Motorcycle Manufacturer Any, Husqvarna, Maico, Penton
   
Cables, Throttle, Nylon-Lined
Price $23.00
Description

Our works-quality throttle cables are made in-house from only the finest materials to ensure your satisfaction for fit-and-function. We can produce throttle cables for an amazing arrary of applications; only our most popular are listed here. Please telephone with any other specific needs.

Motorcycle Model Any
Motorcycle Manufacturer Any, Husqvarna, Maico, Penton
Carburetor Adaptor Plate, Amal Manifold to Spigot Carb

These adaptor plates bolt-on to an existing head or manifold which was originally intended for an Amal carburetor. The Mikuni rubber flange then bolts to this plate, allowing Mikuni or Amal MkII spigot-mount carburetors to be used. The small plate adapts a 2" stud spacing for 26-34mm carbs; the large plate adapts 65mm spacing to 36-38mm carbs.

Carburetor Adaptor Plate, Amal Manifold to Spigot Carb - $32.00

These adaptor plates bolt-on to an existing head or manifold which was originally intended for an Amal carburetor. The Mikuni rubber flange then bolts to this plate, allowing Mikuni or Amal MkII spigot-mount carburetors to be used. The small plate adapts a 2" stud spacing for 26-34mm carbs; the large plate adapts 65mm spacing to 36-38mm carbs.

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Carburetor Adaptor Plate, Amal Manifold to Spigot Carb
Price $32.00
Description

These adaptor plates bolt-on to an existing head or manifold which was originally intended for an Amal carburetor. The Mikuni rubber flange then bolts to this plate, allowing Mikuni or Amal MkII spigot-mount carburetors to be used. The small plate adapts a 2" stud spacing for 26-34mm carbs; the large plate adapts 65mm spacing to 36-38mm carbs.

Motorcycle Model Any
Motorcycle Manufacturer Any
Carburetor, MikCarb, 24mm
India-made"MikCarb" carburetor, made under license from Mikuni Japan. Appears to be new, with decent cable. 24mm flange-mount style, minimum stud spacing approximately 48mm. As-is, no jetting available.
Carburetor, MikCarb, 24mm - $30.00
India-made"MikCarb" carburetor, made under license from Mikuni Japan. Appears to be new, with decent cable. 24mm flange-mount style, minimum stud spacing approximately 48mm. As-is, no jetting available.
Motorcycle Model Any
Motorcycle Manufacturer Any
   
Carburetor, MikCarb, 24mm
Price $30.00
Description India-made"MikCarb" carburetor, made under license from Mikuni Japan. Appears to be new, with decent cable. 24mm flange-mount style, minimum stud spacing approximately 48mm. As-is, no jetting available.
Motorcycle Model Any
Motorcycle Manufacturer Any
Carburetor, Mikuni 24mm
Genuine Mikuni carburetor, unknown condition/history -- most certainly used, but the slide appears to be like-new. 24mm flange-mount/knob-choke style, minimum stud spacing approximately 48mm. Has been amateur painted, not factory-black. As-is, no jetting available.
Carburetor, Mikuni 24mm - $20.00
Genuine Mikuni carburetor, unknown condition/history -- most certainly used, but the slide appears to be like-new. 24mm flange-mount/knob-choke style, minimum stud spacing approximately 48mm. Has been amateur painted, not factory-black. As-is, no jetting available.
Motorcycle Model Any
Motorcycle Manufacturer Any
   
Carburetor, Mikuni 24mm
Price $20.00
Description Genuine Mikuni carburetor, unknown condition/history -- most certainly used, but the slide appears to be like-new. 24mm flange-mount/knob-choke style, minimum stud spacing approximately 48mm. Has been amateur painted, not factory-black. As-is, no jetting available.
Motorcycle Model Any
Motorcycle Manufacturer Any
Ceriani Sticker
Ceriani Sticker - $3.50

Black type on a clear background. As used on Ceriani forks and shocks. Sold each.

Ceriani Sticker - $3.50

Black type on a clear background. As used on Ceriani forks and shocks. Sold each.

Motorcycle Model Anglian, Any, Challenger, Griffon
Motorcycle Manufacturer Any, Greeves, Penton
   
Ceriani Sticker
Price $3.50
Description

Black type on a clear background. As used on Ceriani forks and shocks. Sold each.

Motorcycle Model Anglian, Any, Challenger, Griffon
Motorcycle Manufacturer Any, Greeves, Penton
Chain Guard, Universal Alloy

Your choice to fit either left-drive or right-drive bikes; includes mounting bracket.

Chain Guard, Universal Alloy - $49.00

Your choice to fit either left-drive or right-drive bikes; includes mounting bracket.

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Chain Guard, Universal Alloy
Price $49.00
Description

Your choice to fit either left-drive or right-drive bikes; includes mounting bracket.

Motorcycle Model Any
Motorcycle Manufacturer Any
Chain Tensioner Roller

"Powerlip" roller-type pad with sealed bearings.

Chain Tensioner Roller - $18.00

"Powerlip" roller-type pad with sealed bearings.

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Chain Tensioner Roller
Price $18.00
Description

"Powerlip" roller-type pad with sealed bearings.

Motorcycle Model Any
Motorcycle Manufacturer Any