|
|
While not a complete
catalog, this flyer will give you an overview of our product line and
a listing of some special prices. If you don't see an item that you
need or to place an order, please contact us.
|
updated 07/25/07 |
Parts Index
CARBURETORS EXHAUST
FENDERS GAS TANKS
NUMBER PLATES/SIDE PANELS SEATS
FOOTPEGS CONTROLS
DRIVETRAIN TIRES/WHEELS
SUSPENSION TOOLS
BRITISH BITS BULTACO
BITS CHEMICALS
IGNITION
ACCESSORIES APPAREL
Carburetor/intake system
Proper carburetion is absolutely essential in getting the best performance from your machine. Old, worn carbs are impossible to tune to perfection. Luckily, there is still a full selection of new carburetors to make any machine perform well, for trials or racing, two- or four-stroke.
| Amal Concentric carbs 22-32mm | $180-230.00 |
| Mikuni round-slide, pre-jetted , 26-38mm | $120-150.00 |
| Unifilter air filters, most vintage applications | $15-26.00 |
| K&N air filters | $38-48.00 |
| Sammy Miller alloy air filter, Cub or BSA C15 | $80.00 |
| Rubber flange adaptors for spigot-mount Mikunis | $21.00 |
| Airbox-carburetor boot, Bultaco Pursang | $29.00 |
| Airbox-carburetor boot, Bultaco Sherpa T | $25-47.00 |
| Amal Concentric rubber carb cover | $10.75 |
| Rickman MkIII or MkIV airbox | $155.00 |
| Bultaco Sherpa T 158-199B airbox, Sammy Miller | $150.00 |
| Bultaco Sherpa T filter w/attached hose | $40.00 |
| Husky alloy air filter covers | $35.00 |
| We carry a large stock of Amal, Mikuni and Bing parts at all times | |
| Maico
airboot New airbox-carburetor boot for most vintage and post-vintage Maicos. Price $28.00 |
 |
Exhaust pipes
A modern-day tuned expansion chamber offers quick, affordable bolt-on performance. Power delivery is smoothed to offer a very ridable yet quick machine that will deliver results to you!
| Expansion chambers with integral, rebuildable silencers for
Bultaco, Honda, CZ, Maico, Suzuki, Yamaha, Ossa, Montesa |
$195.00 |
| Bultaco Sherpa T chrome headpipe, 4-spd or spring-retained type | $90.00 |
| Trials headpipes, chrome, AMC or Ariel | $90.00 |
| Honda TL125 Sammy Miller full exhaust system | $220.00 |
| Rickman Triumph 500 and 650 pipes, supplied as bent tubes ready to be fitted to your machine | $185.00 |
| BSA C15/B40 (1-3/8") or Triumph Cub (1-1/4"), chrome | $110.00 |
| BSA B50 MX (1-1/2") Headpipe, chrome | $110.00 |
| Clamp-on DG steel-bodied silencers, 1.0"-1.25" | $63.00 |
| Clamp-on J&R spark arrestor/silencer, availability is sporadic | $95.00 |
| Sammy Miller alloy trials silencer, BSA, Cub, Ariel, AMC | $95.00 |
| Universal SuperTrapp, 3" steel body, complete w/core kit | $112.00 |
| Alloy universal 2" spark arrestor only | $70.00 |
Fenders
New fenders are the finishing touch for a good-looking machine. We have
proper "period" fenders for the bikes from the 1940s to the '70s.
| Alloy front fender, 4" wide for 21" wheel | $85.00 |
| Alloy rear fenders, 5" or 6" wide for 18-19" wheel | $90.00 |
| Bultaco “box” rear fenders, Model 18, 42, 48, 68, fiberglass | $105.00 |
| Bultaco #86-106 front or rear, fiberglass | $60.00 |
| Bultaco #117-136 front or rear, fiberglass | $60.00 |
| Maico front or rear ('70-74), fiberglass | $60.00 |
| Ossa Stiletto or Phantom, front or rear, fiberglass | $60.00 |
| Rickman MkIII or MkIV fiberglass front, all colors | $85.00 |
| Rickman MkIII or MkIV fiberglass rear tail, all colors | $65.00 |
| Honda TL125 replicas, fiberglass, pair | $110.00 |
| Bultaco Sherpa T replica plastic, white, red, blue, yellow, made in Italy, nice, shiny finish, front or rear |
$29.00 |
| Montesa 348/349 rear fender w/logo, white or red | $45.00 |
| Factory replica plastic fenders, front or rear, to fit Husky, CZ, Maico, Yamaha |
$40.00 |
| Husky plastic inner fender | $40.00 |
| Honda CR125 or 250, paintable ABS plastic, front or rear | $50.00 |
| Universal plastic fenders, front or rear, red, white or yellow | $40.00 |
| Full-length, injection-molded rear fender, white or gray | $38.00 |
| Trials front fender mounts for Bultaco, Honda, Yamaha 175, Ossa | $65.00 |
| Low front fender mount for Ceriani forks | $65.00 |
| Universal front fender stays, you-weld ends and clips | $55.00 |
| Gas Tanks |  |
 |
| Bultaco Sherpa T four-speed tank, fiberglass, red | $260.00 |
| Bultaco Sherpa T '72-'75 tank, decals & cap inc. side panel and seat, | $340.00 |
| Bultaco Sherpa T #158-on tank, figlass, red or blue, w/cap | $260.00 |
| Alloy British scrambles tanks, comes with flip-up Monza cap, for AMC, Ariel, BSA, DOT, Greeves etc | $380.00-up |
| BSA B44GP-style narrow fiberglass tank, white, w/cap | $260.00 |
| Same as above, in alloy | $385.00 |
| Alloy BSA Gold Star scrambles tank | $625.00 |
| Ariel HT5 trials tank, fiberglass, white w/cap | $260.00 |
| Rickman MkIII or MkIV MX tank, all colors, w/Monza cap | $330.00 |
| Yamaha TY175 or TY250 fiberglass tank/seat combo, w/seat | $340.00 |
| Yamaha TY80 fiberglass tank/seat combo, w/seat | $280.00 |
| Husky/Maico/Penton petcocks | $21.00 |
| Bultaco/Ossa/Montesa petcocks | $21.00 |
| CZ petcocks | $21.00 |
Number plates/sidepanels
| Oval plastic number plate (yellow, black, white, green) | $3.00 |
| Rectangle plastic, 10"x12" white | $4.00 |
| Alloy oval or 8"x10" rectangle, no bracket | $14.00 |
| Mounting for 8"x10" or 10"x12" alloy plates |
$14.00 |
| Alloy 10"x12" rectangle, no bracket | $18.00 |
| Self-adhesive number plate backing, each | $5.00 |
| Bultaco fiberglass sidepanels, '72-'75, pair | $60.00 |
| Bultaco ABS plastic sidepanels, pair | $80.00 |
| Bultaco Sherpa T sidepanels 1979-82, pair | $75.00 |
| BSA B50 fiberglass sidepanels, round or rectangular bkgrd, pair | $110.00 |
| BSA alloy sidepanels, pair | $75.00 |
| Honda CR125 or 250, paintable ABS, white, pair | $80.00 |
| Honda TL125 fiberglass sidepanels, pair | $120.00 |
| Rickman MkIII or MkIV fiberglass sidepanels, all colors, each | $70.00 |
| Factory Effex standard numbers 6" white or black, 3 pack |
$2.50 |
| K&N early '70s numbers, with "balls" on ends, 6" blk, each | $0.50 |
| Letters, 3" black, entire alphabet available, each | $0.50 |
Seats
When you're comfortable, you ride better, it's that simple. Our selection of covers,
foams and complete seats will get you on track in no time.
| BSA Gold Star, B50MX, Greeves MCS or Matchless G85 seat, complete | $225.00 |
| Sammy Miller pre-65 universal trials seat | $99.00 |
| SM BSA B40 slimline trials seat | $90.00 |
| SM OEM replica trials seats, Ossa, '72-'80 Bultaco, Hon TL125, Yam TY175 | $95.00 |
| Rickman MkIII or MkIV seats, all colors, standard thickness | $170.00 |
| Rickman fiberglass center section, all models and colors | $78.00 |
| Bultaco Sherpa T #80-#125 seat covers | $35.00 |
| Bultaco seat bases, most Pursangs and Sherpa Ts | $46.00 |
| Replica MX seat covers for Bultaco, Husky, Honda, Kawasaki, Maico, Montesa, Ossa, Suzuki and Yamaha YZ, w/brand logo |
$60.00 |
| Pre-molded OEM-style replica seat foam for above bikes | $65.00 |
| Replica seat cover, CZ | $76.00 |
 |
TY80 seat - Quantities Limited Replacement seat for the Yamaha TY80 mini trials bike. Covered in smooth black or red vinyl. Limited quantity available! |
Controls
One of the keys to successful riding is a bike that works properly in every detail.
Having good controls is a big step in that direction.
| Vinyl
lever covers Quantities Limited Vinyl lever covers. Snap-on black vinyl control lever remove, yet do an excellent job of keeping dirt and debris out of your levers. Back in stock for just $16/pr. |
 |
| Chrome steel MX handlebars, nice classic bend, 4.5" rise | $54.00 |
| Sammy Miller chrome trials handlebars | $45.00 |
| Renthal bars, 6.0 MX and 4.5, 5.5,or 6.0 trials | $80.00 |
| Gunnar Gasser throttles, real ones, not a copy | $24.00 |
| Amal 90-degree trials throttle, alloy, like Gasser | $29.00 |
| Chrome throttle, US-made, similar to British or Spanish Amal | $25.00 |
| Magura 314 throttle | $20.00 |
| Magura dog-leg levers, split-perch, pair |
$70.00 |
| Chrome levers, British copies, US made, each | $26.00 |
| Slip-in cable adjuster for chrome levers, each | $4.50 |
| Amal alloy levers, as used on ’74 Bultaco, our favorite!, pair | $89.00 |
| Magura ISDT lever dust cover, black | $5.00 |
| Magura-style MX lever cover, rubber, pair | $7.50 |
| MX lever cover, vinyl w/snaps, pair | $16.00 |
| Yamaha/Terrycable-style rubber lever covers, pair | $4.00 |
| Speed & Sport soft-compound handgrips, black | $7.00 |
| Gas Gas-style trials grips, black, pair | $10.00 |
| Genuine Oury grips, black, pair | $9.00 |
| Timken tapered steering head bearings, each | $14-$20.00 |
| Nylon lined clutch or brake cables, all popular bikes | $24.00 |
| Nylon lined throttle cable, Gunnar Gasser to any carb | $22.00 |
| Motion Pro throttle cable, Gasser to Amal 600 or 900 carb | $22.00 |
| Barnett cables for BSA, Bultaco, Triumph, Ossa | $15-24.00 |
|
Custom-made cables available, call for info and pricing |
|
Footpegs
This weld-on footrest kit is a quick, simple solution to an age-old problem in dirtbike fabrication.
| Easy-to-weld-on perches are included with a high-grip, spring-loaded pegs and hardware | $70.00 |
| Weld-on footpeg "wideners" with
aggresive teeth, pair |
$24.00 |
| Rickman MkIII or MkIV folding footrest kits, ready to install | $160.00 |
| Bates dirt track pegs, complete w/hex, blade, rubber, pair | $60.00 |
Drivetrain
Making all the power in the world doesn't do any good if you don't get it to the Earth.
We have excellent prices on chains and sprockets!
| Alloy rear sprockets, #420 chain, 25-46T | $44.00 |
| Alloy rear sprockets, #420 chain, 47-53T | $49.00 |
| Alloy rear sprockets, #420 chain, 54-57T | $50.00 |
| Alloy rear sprockets, #420 chain, 58-60T | $54.00 |
| Alloy rear sprockets, #420 chain, 61-72T | $67.00 |
| Alloy rear sprockets, #428 chain, 25-46T | $49.00 |
| Alloy rear sprockets, #428 chain, 47-53T | $57.00 |
| Alloy rear sprockets, #428 chain, 54-57T | $62.00 |
| Alloy rear sprockets, #428 chain, 58-60T | $65.00 |
| Alloy rear sprockets, #428 chain, 61-72T | $76.00 |
| Alloy rear sprockets, #520 chain, 25-45T | $51.00 |
| Alloy rear sprockets, #520 chain, 46-52T | $54.00 |
| Alloy rear sprockets, #520 chain, 53-56T | $60.00 |
| Alloy rear sprockets, #520 chain, 57-64T | $77.00 |
| Alloy rear sprockets, #520 chain, 65-70T | $87.00 |
| Alloy rear sprockets, #530 chain, 28-45T | $68.00 |
| Alloy rear sprockets, #530 chain, 46-52T | $77.00 |
| Alloy rear sprockets, #530 chain, 53-56T | $85.00 |
| Alloy rear sprockets, #530 chain, 57-64T | $105.00 |
| Alloy rear sprockets, #530 chain, 65-70T | $114.00 |
|
• Custom-made sprockets available -- call for details |
|
| Countershaft sprockets, most two-strokes | $12-28.00 |
| Gearbox sprockets, Triumph Cub 13-16T, #415 chain | $32.00 |
| Gearbox sprockets, BSA unit singles 13-15T, #428 chain | $35.00 |
| BSA 14T #520 sprocket, B50, etc. | $38.00 |
| Triumph 650 four-speed gearbox sprocket, 17 or 18T | $40.00 |
| Same as above, custom-ground for #520 chain | $75.00 |
| BSA C15/B40 18T engine sprocket | $60.00 |
| RK Standard drive chain #420, 428, 520 or 530 sizes | $24-36.00 |
| Universal chain tensioner w/double-sided rubbing block | $50.00 |
| Replacement pad for above | $12.00 |
| Universal chain tensioner w/roller-type pad on sealed bearings | $65.00 |
| Roller-type pad w/sealed bearings | $18.00 |
| Universal alloy chain guard, LH or RH | $49.00 |
| Jwis duplex primary chains, Bultaco, Maico, BSA, Triumph, Greeves, Villiers, Ossa and Norton | $30-70.00 |
| Triplex primary chains, Maico, Triumph or BSA | $62-80.00 |
| Single-row primary chain, Bultaco Sherpa T/Alpina | $50.00 |
| Barnett clutch plates for AMC, BSA, Bultaco, Greeves, Husky, Ossa, Triumph, Villiers, each |
$5-10.00 |
| Barnett clutch springs, Bultaco, BSA, Triumph, set | $10-18.00 |
| Super Heavy-Duty Triumph twin clutch springs, each | $4.00 |
| All-steel clutch plate kit, Bultaco or Montesa | $85.00 |
Tires/wheels
| Akront-style Morad rims now available, but slow delivery | $155-190.00 |
| Akront decals, each | $2.50 |
| Sun rims, all sizes | $130-210.00 |
| Excel rims, all sizes | $120-180.00 |
| Chrome steel rims, most sizes, new | $95-140.00 |
| Stainless spoke kits, any motorcycle | $63-80.00 |
| Dunlop, Metzeler and Cheng Shin MX tires | from $40.00 |
| IRC Trial Winner TR11 tires, pair | $175.00 |
| Michelin X11 trials tires, pair | $285.00 |
| Inner tubes, all sizes | $5-9.50 |
| Rim locks, die-cast top-quality units, all sizes | $9.00 |
| Wheel bearings, metric, all sizes, double-sealed | $7.00 |
| Brake shoe relining, on your cores, all makes per pair |
$40.00 |
| EBC brake shoes, Bultaco, Husky or Maico, pair | $28.00 |
| Spool dirt track front hub, complete, 40H | $68.00 |
| Barnes-type dirt track rear hub w/bearings | $275.00 |
| Barnes-type dirt track knock-off adaptor, with nut | $75.00 |
| Grimeca 180mm,double-sided, single-leading-shoe, roadrace front hub, new production, aluminum, 36H | $550.00 |
| Grimeca 230mm,double-sided, four-leading-shoe, roadrace front hub, new production, aluminum, 36H | $675.00 |
| Grimeca 200mm,double-sided, single-leading shoe, roadrace rear hub, new production, aluminum, 36H, cush-drive | $635.00 |
| 17mm hollow chromoly axle, custom-made to specified length | $50.00 |
Suspension
The smoothest way through the bumps is also the quickest way. A new pair of shocks makes a world of difference!
We offer Works Performance, Betor and Progressive Suspension shocks to complement our line of NJB shocks.
NJB Shocks
NJB Shocks offer top-level performance for an affordable price for off-road, street and
road-racing vintage enthusiasts. An updated version of the ever-popular gas Girling,
NJBs come in a variety of lengths and styles for most all twin-shock applications.
(For more information click NJB shocks )
| NJB Trial or MX Expert gas shock, single-rate spring | $225.00 |
| Trial Expert shock, dual-rate spring | $250.00 |
| MX Expert shock, dual-rate spring | $250.00 |
| Clubman lightweight trials shocks | $165.00 |
| Shock spring shrouds, black or chrome, pair | $30.00 |
| Dual-rate spring conversion, pair | $35.00 |
| Bonded rubber bushes (specify size), each | $9.00 |
Works & Betor Shocks
| Works Performance shocks, steel body, dual-rate springs | $410.00 |
| Works Performance shocks, alloy body, dual-rate springs | $500.00 |
| Betor trials shocks, chrome springs, 13.4" or 14.0" | $225.00 |
Fork Accessories
| Fork seals, set of four for most 35mm forks | $20.00 |
| Fork seals, wide double-lip, steel body, set of four, 35mm | $48.00 |
| Fork seals for Rickman 1-5/8" forks | $15.00 |
| Fork seals, Maico 36mm, pair | $14.00 |
| Fork wipers, generic black for 35mm forks, pair | $22.00 |
| Fork wipers, Bultaco Betor forks, each | $14.00 |
| Fork wipers, Ceriani, pair | $32.00 |
| Fork gaiters, 35mm, universal fit, pair | $25.00 |
| Springs, Betor MX | $48.00 |
| Springs, Betor trials | $48.00 |
| Springs, Ceriani MX | $50-79.00 |
| Ceriani road race fork caps, new, pair | $43.00 |
| 35mm clamp-on steering stops, pair | $45.00 |
Tools
| Britool Whitworth combination wrenches, 7pc set, 1/8-1/2 | $113.00 |
| Whitworth 6pc socket set, 3/8drive 12pt, Britool brand | $60.00 |
| • Affordable Withworth tools from Spain or Japan also available. Please call. | |
| • British taps and dies available separately or in sets. Please call. | |
| Motion Pro Piston pin removal tool | $69.00 |
| Ratio-Rite measuring cup | $5.00 |
| Heavy-Duty chain breaker | $30.00 |
| Tire iron, 16" long w/double compound curve, each | $17.00 |
| Flywheel pullers, all popular makes | $16.00 |
| Tire gauge, 0-20psi, 1/2psi increments | $7.00 |
| Bultaco clutch-holding tool | $30.00 |
| Flywheel holding tool | $70.00 |
| Safety wire, .032" dia, one-pound can | $23.00 |
British tidbits
| Alpha big-end assemblies, all makes | from $160.00 |
|
• Alpha valves and guides also available |
|
| Robbins pistons for British machines | from $85.00 |
| Matchless G12 piston kits, 1960-on, 8.5:1 or 11:1 comp | $200.00 |
| Cub poly trials skidplate | $70.00 |
| Cub trials footrest kit, includes plates, pegs, brake pedal | $150.00 |
| Cub Silentbloc swingarm conversion kit | $85.00 |
| Alloy Cub or C15 oil tank | $125.00 |
| Kickstart lever, cranked at starter shaft, AMC, Villiers, Cub, BSA single, Tri 650 | $165.00 |
| Kickstart rubber for standard lever | $4.00 |
| Shift rubber | $2.00 |
| Finned rockerbox caps, set of four, Triumph twins | $22.00 |
| Points and condensors, Japanese or English, all models | $6.50-16.00 |
| Individual gaskets and gasket sets, all popular machines | $1.00-75.00 |
| Bronze valve guides (each) | $12.00 |
| Boyer Bransden ignition for all singles and twins | $140.00 |
| Boyer Bransden microdigital ignition | $210.00 |
| PVL electronic ignition system for singles or twins, finest off-road ignition available! | $495.00 |
Bultaco goodies
| Most popular decals for Sherpa T, Alpina, Pursang, Metralla, and more | from $1.50 |
| Tank decals (most models, each) | $2.75 |
| Long “Bultaco” decal (yel/blk, slvr/blk, red/wht) | $5.50 |
| Thick plastic tank emblem, 1973-on, each | $12.00 |
| Clutch adjuster plug, alloy | $20.00 |
| Kickstart rubbers, thumbs-up design | $9.00 |
| Shift lever rubbers | $4.75 |
| Thumbs-up handgrips, pair | $14.00 |
| "Bultaco" mudflaps | $17.00 |
| Gray plastic transmission fill plugs |
$7.00 |
| Pursang slip-in sidestand ‘72-’75, new | $20.00 |
| Airbox-carburetor boots | $25-48.00 |
| Points/condensor, set | $28.00 |
| Shift lever, left- or right-hand | $39.00 |
|
We have a large assortment of new and used Bultaco parts |
|
Chemicals/paint
| PJ1 contact cleaner | $7.25 |
| PJ1 Fork Oil 10/15/20/30w,
1/2 liter |
$6.75 |
| PJ1 Fork Oil 10/15/20/30w, 1 liter | $10.75 |
| Rock Oil SOC degreaser, liter | $4.00 |
| Rock Oil 5w fork oil, liter | $8.00 |
| Rock Oil Chain Lube | $8.00 |
| Non-detergent 10w oil for British/Spanish primaries, quart | $3.50 |
| Non-detergent 30w break-in oil, quart | $3.50 |
| Golden Spectro 80w90 gear oil, quart | $6.00 |
| Golden Spectro premix oil, 12oz | $4.75 |
| Golden Spectro 20w fork oil, quart | $6.75 |
| PJ1 Fast Black paint, Hi-Temp | $9.95 |
| PJ1 Fast Black paint, Satin black for cases | $8.50 |
| Silver epoxy enamel frame spray paint, Bultaco/Husky/Ossa |
$7.50 |
| 3Bond 1104 semi-drying liquid gasket, 100g tube | $6.00 |
| PJ1 Renew & Protect (like Armor-All), 8oz bottle | $1.50 |
Spark plugs
| Autolite AE903, AG403, AG203, AE22, AE2, AG2, AG501, AG701 | $1.00 ea, or 10/$7.00 |
| NGK B7ES, B8ES, B9ES, B6HS, B8HS | $2.50 ea, or 10/$23.00 |
Accessories
| Weatherproof spark plug cap | $3.00 |
| Reinforced rubber grommets, pk/10 | $6.50 |
| Fuel filters | $2.00 |
| Cable guides for front number plates | $6.00 |
| 1/4" fuel line "T", steel | $9.00 |
| Ancra original red tiedowns | $24.00 |
| Clymer service manual for
Bultaco/Montesa/Ossa |
$33.00 |
| Clymer service manual for
CZ/Hodaka/Husqvarna |
$33.00 |
| Haynes service manuals for BSA, Triumph, Honda | $23.00 |
| Haynes manual, Yamaha TY175 | $29.00 |
| Service & parts manual, Rickman 125/250 | $30.00 |
| Owners assembly manual, Rickman MK3/MK4 | $15.00 |
| Service manual, Yamaha TY250, photocopy | $20.00 |
| Service manual, Honda TL250, photocopy | $20.00 |
| Service manual, Villiers 9E-37A | $20.00 |
| Service manual, Bultaco El Bandido/Montadero, photocopy | $15.00 |
|
We have a large library of books, parts books & manuals. |
|
Apparel
| Speed & Sport jerseys, L, XL or XXL | $20.00 |
| Speed & Sport T-shirt | $12.00 |
| Sammy Miller trials gloves | $29.00 |
| Mechanix gloves, original style |
$25.00 |
|
A full line of riding apparel, including
Metro
and major current brands, is available. |
|